LASERCUT TECHNOLOGIES INC.

·         High edge quality with maximum cutting speeds, accuracy and repeatability;

·         Standard Table sizes: 61" x 100" (2550 x 1550), 81" x 121" (3080 x 2060) and 81" x 161" (4080 x 2060);

·         Cutting head with fast capacitive sensor and standard high pressure 5"- 7.5" lens; optional 3.75"for fast thin material cut and 9" lens for heavy cut on thick Stainless Steel (over 5/8", 15mm);

·         Fast Flow Laser options: El.En. CO₂ 2200W, 3500W, 5000W and 6000W; the C3333 (3500W) laser has a new oil free magnetic bearings blower (more than three times the std. operational hours);

·         Very Low Gas consumption;

·         Direct laser control with PWM (Pulse Width Modulation);

·         CNC Control: Advanced Windows Real Time Control with 0.125 millisecond cycle and Smart Manager 3.X operation Software with Material Parameters Database;

·         Smart PCS (Piercing Controlled System) unit increases the piercing speed, add the auto detection(it senses when the piercing is finished) and reduce the pierce blow out event;

·         Smart CPS (Cutting Process Sensor) automatic cutting status detection (going to plasma mode) with two recovering procedures;

·         Smart AFS (Auto Focusing System) automatic set of the focus point;

·         Smart LCS (Lens Crack Sensor), optional automatic lens status warning (damage/Dirty);

·         Smart AED (Automatic Edge Detection) on metal sheet (no needs of manual sheet alignment);

·         Smart CPC (Corner Pulsed Control) on mild steel material to make exceptional sharp corner and stable cut on complex geometry;

·         Automatic Gas Assist System up to 20Bar (300PSI on 3500W) or 25 Bar (360PSI on 6000W);

·         Dual pallet shuttle with precise indexing and hydraulic up/down system (not air), strong chain to drive the fully automatic pallet exchange cycles;

·         Box Cutting (LPSF) up to 7" wide (optional);

·         Fully interlocked enclosure protection, including the pallet exchange area with light guards or mats (as 2^nd customer option);

·         Easy Scrap removal system;

·         Air Filters;

·         Chiller System;

·         Optional external gas mixer unit to supply up to 3 El.En. Laser systems at the same time;

·         Quick and easy installation with no special foundation required1;

·         CAD/CAM Software Lantek Expert Integra (for metal, with optional SolidWorks 3D integration), AutoCAD (for acrylic);

·         El.En. Group designs and produces the CNC system as well as the laser resonator, adding the full technology know-how into a single product;

·         Standard Warranty: 1 year or 2000h, optional Premium Service Pack.